SerVision CVG-M Información técnica descargar pdf (Pagina 114)

SerVision Embedded Video Gateway System Guide

Configuring Sensor and Activator Settings 113

 Field

 Description

Polarity

(Sensors only)

Select Reverse if the normal, inactive state of the sensor is

closed

– if it is activated

from on to off.

Note: Sensors are either designed to activate from “off to on” (normally open, or

standard polarity) or from “on to off” (normally closed, or “reverse polarity”) when an

event occurs. Consult the device’s manual to determine its normal state.

Note: This field is equivalent to the "Normal Status" field for activators.

Normal status

(Activators only)

Select the normal, inactive state of the activator.

Note: Activators are either designed to activate from “off to on” (normally open) or

from “on to off” (normally closed) when an event occurs. Consult the device’s manual to

determine its normal state.

Note: This field is equivalent to the "Polarity" field for sensors.

Attach cameras

Select the cameras to which the device should be linked, if desired. Selecting a camera

has the following effects:

 You will be able to configure e-mail notifications of events that were

triggered by this device to include images.

 If you activate AVV for the device, video of events from each of the

selected cameras is uploaded to the AVV server.

Note: If the camera is configured to record by event, attaching it to a device

here does not automatically mean that the device is a trigger that activates

recording. The device must be selected as one of the recorder triggers in the

camera configuration for this to occur. If it is not selected as a trigger, the Video

Gateway may not record the event, and therefore it will not be possible to upload

it to the AVV server. For information about defining recorder triggers, see

Configuring Video Recording

, page 96.

 Events from the device will appear in the client interface under the

selected camera as well as under the device. This makes it possible to

play back video of the event by dragging and dropping it into a

camera pane in the MultiClient.

4. Under Notifications, under When Sensor On or On Activator Activated, specify the actions that should be

performed when the device triggers an event, as follows:

Field

Description

AVV

Select this option to have the Video Gateway send video of the event to an AVV server

for downloading. The video is downloaded to the site defined in the AVV screen, in the

format defined there (see

Automatically Uploading Video to an AVV Server

, page 64) ,

and e-mail notifications are sent to all e-mail recipients (see

SMS and E-mail

Notifications

, page 58).

Note: Two e-mail notifications are sent – one when the event is first detected, and the

other when uploading of the video to the AVV server is completed. Thus, the video clip

may not be available yet when you receive the first e-mail notification.

Note: This feature only works if the device is attached to a camera and recording

(either event-triggered or continuous) is activated for the camera (see

Video Recording

Settings

, page 96).

Note: This option only appears if AVV is activated for the Video Gateway (see

Automatically Uploading Video to an AVV Server

, page 64).

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 202 203

Comentarios a estos manuales

Sin comentarios

SerVision CVG-M Información técnica Pagina 114

Comentarios a estos manuales