SerVision MVG 400 Guía de usuario descargar pdf (Pagina 78)

SerVision MVG 400 System Guide

Configuring the MVG 400 78

Field Description

available, the unit will not connect to the proxy server.

• Modem: The unit should only use a Modem connection. If none

is available, the unit will not connect to the proxy server.

Host/IP Fill in the IP address or hostname of the proxy server.

Port Fill in the access port of the proxy server.

Note: For full details on using this option, consult your vendor.

3. If you are using a DDNS service, under DDNS, select Enabled. The fields required to

configure the DDNS settings are added to the screen.

Figure 69: DDNS settings

Fill in the fields as follows:

Field Description

Use Select the network connection to use to connect to the DDNS service:

• Any: The unit can use any available network connection; it will

connect using the highest priority connection available (as

defined under Network Priorities; see

Network Priorities

page 73).

• LAN: The unit should only use a LAN connection. If none is

available, the unit will not connect to the DDNS service.

• WiFi: The unit should only use a WiFi connection. If none is

available, the unit will not connect to the DDNS service.

• Modem: The unit should only use a Modem connection. If none

is available, the unit will not connect to the DDNS service.

Type Select the type of DDNS service.

Note: If you select

No-IP

DynDNS

, the Username, Password,

and Confirm Password fields are added to the screen, and the

Advanced field is removed from the screen.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 189 190

Sin comentarios

SerVision MVG 400 Guía de usuario Pagina 78